Wood can accept tensile loads acting in the direction
Due to Screws Suppliers grain structure, wood can accept tensile loads acting in the direction of the wood fibres very effectively, but is not able to cope with such large forces when they act transverse to the grain. Self-tapping double-threaded screws have been found to be an easy to install alternative.
The same applies when structures or intersections that have already been implemented to a high visual quality need to be upgraded, but should if possible remain unchanged, or when the space to assemble reinforcement is very limited.5mm x 100mm, spaced 40mm apart and 40mm from the edge of the beam.
In new constructions, they can be used as a preventive measure before installation and can permit slender, even filigree cross sections due to the large loads that the double-threaded screws can distribute..
Then the calculation program requires the values of the loads, as well as the duration for which they act on the supporting structure. The system view displays the existing assembly based on the values that have been entered.