test4actual

1. Carefully read again the full topic
Before the integrity of the examination carefully read again the topic, then carefully check all pre-configured IP address is very important. Not to overlook any details of the topic and some.
2. Control your time
Answer before the start we must formulate an overall time-use plans, the plan should include each and every part of you will want to use the time. Even if you answer at the time not to forget this time to plan. Time in the formulation of plans, you also do not forget to check the final time required are also included.
3. To know the specific needs of each subject
And not to the subject at a time when there is no such demand for their assumption that the demand is there. If you test at a time when there is any doubt about the demand, then put you on the subject of the demand for examiners to understand and communicate what is a sensible approach.
4. Put each subject as a unit
At the completion of one question, and is about to do the next subject,the purpose of inspection and verification are important. Same test you should also be made available to you in accordance with the topology re-fit you draw a more complete examination of the topology. It will help you better get a clear understanding of network structure.
5. Troubleshooting
You must know how to use the appropriate tools for troubleshooting. Although debugging is very important, but not to spend too much work at this time (especially those who are only two points or one-third, and will not affect the problem to other topics). If you encounter a very strange question, but also not to at this topic too much to spend on energy. You go to the completion of those skilled, it was relatively easy topic, and then come back to complete those unfamiliar with the subject too late.
6. Ready for your examination a list of
At a time when the examination for you to do some of the key configuration of some notes, so you better be able to assist the completion of the experiment. This list should also record the following information: who you have not yet had time to complete the mission, those who are not sure you unfamiliar with the task of right or wrong, those you have identified the problem does not arise, such as mission.
7. The test you have completed the mission
Absolutely not to trust you have in a few hours before the end of the command configuration. Because after you configure any one of the command may have the configuration before you expire. Forever is configured to be aware of configuration, only verify the configuration is valid.
8. Remember that you always save the configuration
9. Do not change configuration
Examination at the time only about half an hour when not to easily change your configure .
10. The pace of the examination is a question of life and death
So you at the week before the examination, it is best to test the core teaching full review, so that you can configure the use of skilled to complete those relatively simple and recurring problem.
http://www.test4actual.com/cisco.html