Raspberry Pi 3 Wifi設定
專題筆記--
1.安裝wpa client
sudo apt-get install wireless-tools wpasupplicant
2.掃描無線網路
sudo iwlist wlan0 scan
3.記錄ESSID名稱
4.將無線網路新增至 /etc/network/interfaces
sudo nano /etc/network/interfaces
5. /etc/network/interfaces 修改為
....一.....
....些.........註.....
....解.....
source-directory /etc/network/interface.d
auto loiface lo inet loopback
auto eth0iface eth0 inet dhcp
auto wlan0allow-hotplug wlan0iface wlan0 inet dhcp wpa-ssid WIFI_NAME wpa-psk WIFI_PASSWORD
Ctrl+X儲存離開
6.重新啟動wlan0
sudo ifdown wlan0
message:
ifdown: interface wlan0 not configured
sudo ifup wlan0
message:
Internet Systems Consortium DHCP Client 4.3.1
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/wlan0/.....
Sending on LPF/wlan0/.......
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.0.1
DHCPACK from 192.168.0.1
bound to ...... -- renewal in 3561 seconds.
在各個網站查完資料後整理的資訊,若有侵權,請告知謝謝!